The Emtelle FibreFast™ Xtreme is the new ultra-thin optical fibre microcable with up to twelve fibres set in an encapsulating layer providing excellent dimensional and thermal stability. An outer low friction thermoplastic layer provides a high level of protection and excellent installation properties. The microcable is designed to be installed by blowing, pulling or pushing into Fibreflow microducts and tube bundles. The fibres are dry, not coated with gel, thus permitting fast and contamination-free connections.
FibreFast™ Xtreme
KEY BENEFITS
KEY FEATURES
Designed to be installed by blowing, pulling or pushing.
Low weight.
Small diameter.
All dielectric design.
Ultra low friction sheath.
Thermoplastic layer to give high protection.
Fibres are dry, no gel used.
VARIATIONS
INSTALLATION STEPS
1.
The FibreFast™ Xtreme will come supplied in standard Emtelle fibre pans, which makes is easier to dispense than a cable reel
2.
Open fibre pan and attach Pan guide arm
3.
Attach fibre bead to Nano cable
4.
Insert FibreFast™ Extreme into Blowing Head and blow in fibre
5.
Insert Microduct into closure/cabinet in preparation for splicing
6.
Insert/tighten Gas block connectors/seals
7.
Remove outer jacket of FibreFast™ Xtreme
8.
Remove Inner jacket of FibreFast™ Xtreme
9.
Splice 250um fibres as per standard splicing practices
